Filter
Top Products
15
Battery Level Indicator
The battery level indicator appears on the
LCD monitor or in the viewfinder and
shows you the amount of power in the
rechargeable battery.
Powering Your Camcorder
Battery Care and Storage
• Recharging takes approximately 100
minutes depending on the battery’s
condition.
• Refreshing takes approximately five
hours and 30 minutes depending on the
battery’s condition.
• After repeated charging and use,
operation time will gradually decrease.
When operation time becomes too short
to be useful, it is time to replace the
battery.
• If the battery discharging must be
stopped in the middle, remove the
battery from the adapter/charger before
unplugging it from the AC outlet.
• Let a hot battery cool down before
attaching it to the adapter/charger.
• The battery will provide better service
if its power is completely drained
before storing it for long periods of
time (30 days or more).
• The battery should be charged in the
temperature range of 50-95°F (10-35ºC)
to prevent damage.
• Do not operate the battery at
temperatures below 32°F (0°C) or
above 104°F (40°C). The battery may
be damaged if operated at temperatures
above 122°F (50°C). Operation time
will decrease at extremely low
temperatures.
• Store the battery at normal room
temperature.
Battery Level Indicator
on LCD Monitor or in
Viewfinder
• When appears, the battery is
fully charged.
• As the power is used and
appear.
• When the battery power is almost gone,
flashes. The camcorder will turn
off automatically after a few seconds.
Place the POWER switch in OFF to
turn off the camcorder before replacing
the battery.
The battery level indicator will not be
recorded on the tape when it appears.