Filter
Top Products
85
Tape stops during
rewind or fast
forward
Camcorder remains
in pause mode
Sound is too low or
distorted
Dew indicator
flashing in
viewfinder or LCD
monitor
Poor auto-focus
operation
Vertical white lines
appear when shoot-
ing bright object
Viewfinder or LCD
monitor displays are
dark or out of focus
Picture is too dark or
subject too dark
Trouble Checks
• Time-counter memory may be on. Whenever an “M”
appears with the time-counter display, the camcorder will
stop rewinding (or fast forwarding) when counter reads
M 0:00:00. Press REW or FF again to continue
rewinding or fast forwarding, or press COUNTER R/M to
turn off the memory-stop feature.
• Press PLAY/PAUSE to return to normal playback.
• Subject was too far from camcorder.
• If the dew indicator ( ) flashes on the LCD monitor or
in the viewfinder, there is moisture in the camcorder.
Wait until this indicator no longer appears before
operating the camcorder.
• Subject is dark or behind glass. Auto-focus may not
work under these conditions. Place the FULL
AUTO/PRESET switch in PRESET and focus manually.
See pages 36-37.
• Subject is not in center of LCD monitor or viewfinder or
two subjects are at different distances. Place FULL
AUTO/PRESET switch in PRESET and focus manually.
See pages 36-37.
• Auto focus is automatically turned off when some effects are
selected with the FULL AUTO/PRESET switch. Place FULL
AUTO/PRESET switch in FULL AUTO. See page 32.
• This may occur when background extremely contrasts
with the subject.
• Lens is smudged, and image appears unfocused.
• Eyepiece focus control is misadjusted.
• Adjust BRIGHT control on LCD monitor.
• For best results, only use higher shutter speeds outdoors.
Place the FULL AUTO/PRESET switch in FULL AUTO.
• Add more light using the exposure control. See page 33.
Trouble Checks and Adjustments
(continued on next page)