Filter
Top Products
2
Getting Started
27
Getting Started
1 Pass the end of the strap
through the protective cover
and triangular ring.
2 Secure the end of the strap
on the inside of the clasp.
1 Make sure that the camera is turned off.
2 Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3 Align the lens mount index
(red dots: 3) on the camera
and the lens, and secure
by turning the lens clockwise
until it clicks.
To remove the lens
Attach the lens cap → turn
the lens counterclockwise
while pressing the lens
unlock button (4).
Attaching the Strap Attaching a Lens
3
4
e_kb502_om.book Page 27 Monday, October 14, 2013 4:14 PM