Filter
Top Products
2
Getting Started
30
We recommend the use of the optional AC adapter kit K-AC132
when using the monitor for a long time or when connecting
the camera to a computer or AV device.
1 Make sure that the camera
is turned off, and open
the terminal cover.
2 Align the A marks on the DC
terminal of the AC adapter
and DC input terminal of
the camera, and connect.
3 Connect the AC adapter to the AC plug cord,
and plug the cord into the power outlet.
u Caution
• Make sure the camera is turned off before connecting
or disconnecting the AC adapter.
• Make sure connections are secure between the terminals.
The memory card or data may be corrupted if the connection
to the power supply is lost while the card is being accessed.
• Be sure to read the manual of the AC adapter kit before using
the AC adapter.
The following memory cards can be used with this camera.
• SD Memory Card, SDHC Memory Card, and SDXC
Memory Card
• Eye-Fi card
• Flucard compatible with this camera
In this manual, they are referred to as memory cards.
1 Make sure that the camera is turned off.
2 Slide the card cover
in the direction of 1.
3 Insert the card all the way
into the memory card slot
with the memory card label
facing toward the monitor.
Insert the card in the SD2 slot to
use an Eye-Fi card or a Flucard.
Push the memory card in once
to remove.
Using the AC Adapter
Inserting a Memory Card
2
1
e_kb502_om.book Page 30 Monday, October 14, 2013 4:14 PM