Filter
Top Products
3
Shooting
51
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select Q and press B.
3 Select Q, R, or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
4 Press the shutter release button halfway.
5 Point the remote control unit towards the remote
control receiver on the front or back of the camera,
and press the shutter release button on the remote
control unit.
t Memo
• The maximum operating distance of the remote control unit
is approx. 4 m from the front of the camera and approx. 2 m
from the back of the camera.
• To adjust focus with remote control, set in [19. AF with
Remote Control] of the E3 menu.
• When using the Remote Control Waterproof O-RC1,
the autofocus system can be operated with the q button.
The r button cannot be used.
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select T and press B.
3 Select T, 1, or U and press B.
4 Use Q to select the number of shots.
Select from 2 images (Standard/+), 2 images (Standard/-),
3 images or 5 images.
5 Set the bracket value.
Available operations
6 Press E.
The camera returns to standby mode.
t Memo
• You can set the bracketing order in [8. Bracketing Order]
of the E2 menu.
• The bracket value can be set in increments of 1/3 EV steps
or 1/2 EV steps according to the [1. EV Steps] setting made
in the E1 menu.
• Set [9. One-Push Bracketing] to [On] in the E2 menu to shoot
the specified number of images with one press of the shutter
release button.
Remote Control
Remote Control
Remote Control
Cancel
Cancel
OK
OK
Exposure Bracketing
R
Changes the bracket value (up to ±2 EV).
J→R Adjusts the exposure compensation value.
M
Resets the adjustment value to the default
setting.
Exposure Bracketing
Exposure Bracketing
Cancel
Cancel
3 images
3 images
OK
OK
±0.3EV
±0.3EV
e_kb502_om.book Page 51 Monday, October 14, 2013 4:14 PM