Filter
Top Products
3
Shooting
42
You can set the Noise Reduction
setting when shooting with a high
ISO sensitivity in [High-ISO NR]
of the A2 menu.
When [Custom] is selected, select
[Setting] and set the noise reduction
level according to the ISO sensitivity.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
1 Turn R while pressing 2.
t Memo
• In [5. Link AE and AF Point] of the E1 menu, you can set
the camera to adjust the exposure automatically according
to the position of the focusing point.
Noise Reduction when Shooting
with a High ISO Sensitivity
A2
Auto
Applies Noise Reduction at optimally calculated
levels throughout ISO range. (Default setting)
Low/
Medium/
High
Applies Noise Reduction at constant chosen
level throughout ISO range.
Custom
Applies Noise Reduction at user-defined levels
for each ISO setting.
Off
Does not apply Noise Reduction at any ISO
setting.
High-ISO NR
High-ISO NR
Auto
Auto
Low
Low
Medium
Medium
High
High
Custom
Custom
Off
Off
Cancel
Cancel
OK
OK
High-ISO NR
High-ISO NR
Reset
Reset
1 2
100
100
200
200
400
400
800
800
1600
1600
3200
3200
6400
6400
AE Metering
A
Multi-
segment
The sensor meters the brightness in multiple
different zones. (Default setting)
In backlit locations, this mode automatically
adjusts exposure.
B
Center-
weighted
Metering is weighted at the center of
the sensor.
The sensitivity increases at the center
and no automatic adjustment is performed
even during backlit scenes.
C
Spot
The brightness is measured only within
a limited area at the center of the sensor.
Useful when the subject is small.
12345
12345
12345
12345
1/
1/
F
F
250
250
3200
3200
5.6
5.6
e_kb502_om.book Page 42 Monday, October 14, 2013 4:14 PM