Filter
Top Products
4
Playback
66
Connect the camera to a computer using an USB cable.
Make sure to have a commercially available USB cable
equipped with a micro B terminal.
1 Turn the computer on.
2 Turn the camera off.
3 Open the terminal cover of the camera, and connect
the USB cable to the USB terminal.
4 Connect the USB cable to the USB port
of the computer.
5 Turn the camera on.
The camera is recognized as a removable disk.
If the “K-3” dialog appears, select [Open folder to view
files using Windows Explorer] and click the OK button.
6 Save the captured images to the computer.
7 Disconnect the camera from the computer.
u Caution
• The camera cannot be operated while it is connected
to a computer. To operate the camera, terminate the USB
connection on the computer, then turn off the camera
and remove the USB cable.
t Memo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.96) for system requirements to
connect the camera to a computer or to use the software.
• The USB connection mode when connecting the camera to
a computer can be set in [USB Connection] of the D1 menu.
Normally, you do not need to change the default setting
([MSC]).
Connecting the Camera
to a Computer
USB 3.0 USB 2.0
USB terminal
The micro B terminal supports both USB 3.0 cables and USB
2.0 cables. Both types can be used with this camera.
If the host controller of the device to be connected to
the camera supports USB 3.0, the data transfer speed
is faster when a USB 3.0 cable is used.
e_kb502_om.book Page 66 Monday, October 14, 2013 4:14 PM