Filter
Top Products
3
Shooting
59
Expands the dynamic range and enables a wider range of tones
by the CMOS sensor and reduces the occurrence of
overexposed/underexposed areas.
Set the correction functions from [D-Range Settings] of the A2
menu or the control panel.
u Caution
• When the sensitivity is set to less than ISO 200,
[Highlight Correction] cannot be set to [On].
Takes three consecutive images at three different exposure
levels to create a single composite picture with them.
1 Select [HDR Capture] in A1 menu and press D.
The [HDR Capture] screen appears.
2 Select [HDR AUTO],
[HDR 1], [HDR 2] or [HDR 3],
and press E.
3 Set the range in which to change the exposure
in [Exposure Bracket Value].
Select from ±1, ±2 or ±3.
4 Set whether to use Auto Align or not.
5 Press F twice.
The camera returns to standby mode.
u Caution
• HDR Capture is not available in M or N mode.
• This function cannot be used in combination with some
other functions. (p.82)
• When the drive mode is set to [Interval Shooting], [Auto Align]
is fixed to [Off].
•In C mode, HDR Capture is available only when the drive
mode is set to [Interval Movie Record].
• For HDR Capture, multiple images are combined together to
create a single image, so it will take time to save the image.
The following features can be set from [Lens Correction]
of the A1 menu or the control panel.
t Memo
• Corrections can only be made when a compatible lens is
attached. (p.83) The features are disabled when using an
accessory such as a rear converter that is attached between
the camera and the lens.
• When the file format is set to [RAW] or [RAW+], the correction
information is saved as a RAW file parameter and you can
select [ON] or [OFF] when developing the RAW images.
For the RAW Development function, [Color Fringe
Correction] can also be set. (p.71)
Correcting Images
Brightness Adjustment
Highlight Correction/
Shadow Correction
A2/v
HDR Capture A1/v
Cancel
Cancel
OK
OK
HDR Capture
HDR Capture
Exposure Bracket Value
Exposure Bracket Value
Auto Align
Auto Align
HDR Capture
HDR Capture
T
Uses Auto Align. (Default setting)
S
Does not use Auto Align.
Lens Correction
A1/v
Distortion
Correction
Reduces distortions occurring due
to lens properties.
Lat-Chromatic-
Ab Adj
Reduces lateral chromatic aberrations
occurring due to lens properties.
Peripheral
Illumin. Corr.
Reduces peripheral light fall-off
occurring due to lens properties.
e_kb502_om.book Page 59 Monday, October 14, 2013 4:14 PM