Filter
Top Products
5
Settings
81
3 Specify [Auto Resize].
When set to T, JPEG images are saved to the Eye-Fi card
or Flucard at the size of r.
4 Press F twice.
u Caution
• Be sure to insert an Eye-Fi card or a Flucard in the SD2 slot.
If it is inserted in the SD1 slot, the wireless LAN function
cannot be used. When an Eye-Fi card or a Flucard is not
inserted in the SD2 slot, the [Wireless Memory Card] settings
of the D3 menu cannot be set.
• Be sure to set up a wireless LAN access point on a computer
for the card connection.
• For RAW images and movie files, the success of transfer
depends on the specifications and settings of the Eye-Fi card
in use.
• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images.
The camera may turn off if the internal temperature
of the camera becomes high.
• For precautions on the Eye-Fi card, refer to “About Eye-Fi
Cards” (p.104).
t Memo
• A smartphone can be used to operate this camera when
a Flucard compatible with this camera is used. Refer to
the Flucard manual for details on how to use the card.
• When an Eye-Fi card is used, 100 images can be stored
in a single folder. For RAW+ images, two files are counted
as one image.
• In Step 2, select [Communication Info] to check the Wireless
LAN information, and [Firmware Info/Options] to check
the firmware version of the cards.
• When [Reset Transfer Settings] is selected in Step 2,
the [Action Mode] setting is returned to their default values.
e_kb502_om.book Page 81 Monday, October 14, 2013 4:14 PM