Filter
Top Products
121
Printing PhotograPhs
3
Connect the camera body.
Open the connector cover
and plug the cable into the
USB cable connector.
Press the ADJ. lever. The
camera body will turn on and
the message shown at right
will be displayed; press the
ADJ. lever again immediately.
Note
If you do not press the ADJ. lever while the above message
is displayed, it may in some cases be replaced after two
seconds by a message stating that the camera body is
connecting to a computer. Turn the camera body o and
press the ADJ. lever again.
The message will be replaced by the PictBridge
playback display (if the PictBridge playback
display does not appear, the camera body is still
establishing a connection to the printer).
Caution
Do not use force when connecting the USB cable or when
handling the camera body with the cable connected.