Filter
Top Products
Connecting to a Power Source
[] Insert the battery as shown
- If the camera does not turn on
after you have inserted battery,
please check whether the
battery (+ / -) direction is right.
- When opening the battery
chamber cover, do not use
excessive force. You may
damage it.
Insertingthe memory card
[] Insert the memory card as shown.
-Turn off the camera's power
before inserting the memory card.
- Have the front label of the
memory card facing toward the
front of the camera (Lens) and
the card pins toward the back of
the camera (LCD screen).
- Do not insert the memory card
the wrong way round. Doing so
may damage the memory card
slot.
[] There are 4 battery status indicators displayed on the LCD screen.
Low battery Low battery
capacity capacity Battery empty.
B_y The battery is (Prepare to (Prepare to (Recharge
fully charged recharge or recharge or or use spare
use spare use spare battery)
battery) battery)
When using the camera and the battery in a place that is excessively
cold or hot, the battery status onthe LCD may be different from the
actual battery status.
15