Filter
Top Products
102
Before contacting a service center
The camera doesn’t switch on
There is low battery capacity
Insert a charged battery or recharge the battery. (p.16)
Battery is inserted incorrectly with the polarities reversed
Insert the battery according to the polarity marks (+, -).
The camera power ceases while in use
The battery is exhausted
Insert a charged battery or recharge the battery.
The Camera is turned off automatically
Turn on the camera power again.
The camera has stopped working in a cold environment.
Take the battery out of the camera and warm both by placing
them in your pocket, etc. and then immediately before shooting,
place the battery in the camera and then shoot.
Please check the following
Camera does not take images when you press the Shutter button
There is insufficient memory capacity
Delete unnecessary image files
The memory card has not been formatted
Format the memory card (p.68)
The memory card is exhausted
Insert a new memory card
The memory card is locked
Refer to the [Card Locked] error message
The camera's power is off
Turn the camera power on
The battery is exhausted
Insert a charged battery or recharge the battery (p.16)
The battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
The camera stopped due to a malfunction
Remove /re-insert battery and switch the camera on
The images are unclear
A picture was taken of the subject without setting an appropriate
macro mode
Select an appropriate macro mode to take a clear image.
The picture was teken beyond the flash’s range
Take a picture within the flash’s range
The lens is smudged or dirty
Clean the lens