Filter
Top Products
031
Using the camera buttons to control the camera
You can control the camera by using the camera buttons.
Used for turning the camera’s power
on / off. If there is no operation during
a specifi ed time, the camera turns off
automatically to save battery life. Refer
to page 70 for more information about
the auto power off function.
POWER button
Focus lock
To focus on a subject not positioned in the center of the picture, use
the focus lock function.
3. Recompose the picture
and fully depress the
shutter button.
1. The image to be
captured.
2.
Press the shutter
button halfway and
focus on the subject.
Using the Focus Lock
1. Ensure the subject is in the center of the autofocus frame.
2. Press the shutter button halfway. When the green auto focus
frame lights up, it means the camera is focused on the subject.
Be careful not to press the shutter button all the way down to
avoid taking an unwanted picture.
3. With the shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press
the shutter button completely to take the picture. If you release
your fi nger from the shutter button, the focus lock function will be
cancelled.