Filter
Top Products
073
Settings ( )
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc. .
- PAL :
Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway etc. .
- When using a TV as an external screen, you need to select the
external or AV channel of the TV.
- There may be digital noise on the external screen, but it is not a
malfunction.
- If the image is not in the center of the screen, use the TV controls
to center it.
- When you connect the camera to an external screen, the screen
may not display some parts of some images.
- When you connect the camera to an external screen, the camera’s
menu is displayed on the external screen. The functions displayed
on the screen are the same as those on the camera’s LCD screen.
Setting the USB
If the camera has failed to connect automatically with a PC or a printer
through a USB cable, you can manually set [Computer] or [Printer].
-[USB] sub menus:
[Auto]* : Automatically enables an
external device connected with
a USB cable.
[Computer] : Sets computer connection
mode if the camera does not
recognize a connected
computer automatically.
[Printer] : Sets the Printer connection mode if the the camera does
not recognize a connected printer automatically.
The Video output signal from the camera can be NTSC or PAL.
Your choice of output is governed by the type of device (monitor or
TV, etc.) to which the camera is connected. PAL mode can support
only BDGHI.
Connecting to an external screen
When you connect the camera to an ex-
ternal monitor, the images and menus on
the camera’s LCD screen will be visible
on the external screen.
Selecting Video out type
Back Set
AF Lamp :On
Anynet+ (HDMI-CEC) :On
HDMI Size :1080i
Video Out :NTSC
USB :Auto
Auto Power Off :3 min
Auto
Computer
Printer
Yellow - Video
White - Sound
Back Set
AF Lamp :On
Anynet+ (HDMI-CEC) :On
HDMI Size :1080i
Video Out :NTSC
USB :Auto
Auto Power Off :3 min
NTSC
PAL