Filter
Top Products
014
Connecting to a Power Source
Before inserting any cables or the AC adapter, make sure the
direction of the cable or adapter plug is correct. Do not insert
by force. It may cause breakage of cable or camera.
If the charging LED of the AC Charger does not turn on or blink
after you have inserted the rechargeable battery, please make
sure the battery is inserted correctly.
If you charge the battery with the camera power on, the battery
won’t be fully charged. Turn the camera off while charging the
battery to get a full charge.
Important information about USB cable usage.
Use a USB cable with the correct speci cation.
Do not connect the camera to a PC through a USB hub.
Connect the camera directly to the PC.
Do not connect the camera and other devices to a PC at the
same time. Connect the camera by itself.
If your PC can not detect the camera when you use the front
side USB port, use the back side USB port of computer.
If the USB port of the PC doesn’t meet the Power output standard
(5V, 500mA), the battery may not charge.
Charging LED of the AC charger
Charging LED
Being Charged Red LED is on
Charging is complete Green LED is on
Charging error Orange LED is off or blinking
If you insert a fully discharged battery to charge it, do not turn on
the camera at the same time. The camera must not be turned on
because of the low battery capacity. Charge the battery for more
than 10 minutes before using the camera.
Do not use the fl ash frequently or take a movie clip with the fully
discharged battery charged only for a short time. Even if the
charger is inserted, the camera power may turn off because the
rechargeable battery has discharged again.
How to charge the rechargeable battery