Filter
Top Products
090
Starting the Multi Slide Show
(
)
Selecting Images
Setting play interval
To set the Multi Slide Show play interval:
1. Select the [Interval] sub-menu by
pressing the Up / Down button, and
then pressing the Right button.
2. Use the Up / Down button to select
the desired interval.
3. Press the OK button to save the
configuration.
Image loading time depends on the image size and quality.
The camera displays only the first frame of a Movie file in a slide
show.
Voice recording files are not displayed in a slide show.
To set an interval, you must set Effect to [Off] (See page 91).
You can select images to view in a slide show. [Select] lets collect
images into separate groups labeled [Select1], [Select2], or [Select3].
When you play a slide show, you select the group you want to play.
To collect images into a group, follow these steps:
1. In the Multi Slide Show menu, use the
Up / Down button to select Images, and
then press the OK button.
2.
Use the Up / Down button to select
[Select], and then press the OK button.
The Select window appears.
3.
Press the Up / Down button to select [New
Select] (if necessary), and then press the OK button. The camera
displays Processing, and then displays image thumbnails.
4.
Press the Up / Down / Up / Down button to highlight an image. Press
the OK button to select the image. A check mark appears on the image.
- The images will appear in the order you select them.
5. Repeat Step 4 for each image you want to included. Press the
Fn button when done.
To play a slide show of a group of selected images, follow these steps:
1. On the Multi Slide Show menu, use the Up / Down button to select
[Images], and then press the OK button.
2. Use the Up /Down button to select [Select] (or Select 1, 2, or 3,
depending on what your camera is displaying), and then press the
OK button. The Select window appears.
3. On the Select window, use the Up / Down button to select the
group you want to play, [Select 1, 2, or 3]. The thumbnail screen
for that group appears.
4. Press the Fn button. You are returned to the Main menu.
When you save the first group, it is saved as [Select1]. When you
save a second group, that group is saved as [Select1] and the
previous group is saved as [Select2]. When you save a third group,
that group is saved as [Select1], the previous [Select1] group is
saved as [Select2], and the previous [Select2] group is saved as
[Select3]. If you save a fourth group, the fourth group supplants
the previous [Select1], the previous [Select1] group supplants the
[Select2] group, and the [Select2] group supplants the [Select3].
5. Select [Multi Slide Show] again, and then press the OK button.
6. Select [Start], and then press the OK button.
7.
Select [Play] for single cycle play or [Repeat] for continuous, repetitive
play, and then press the OK button. The slide show begins.
Back Set
Images :All
Interval :1 sec
Music :Off
Effect :Off
Start
All
Date
Select
Back Set
Images :All
Interval :1 sec
Music :Off
Effect :Off
Start
1 sec
3 sec
5
sec
10 sec