Samsung S1050 Digital Camera User Manual


 
31
How to use the menu
3. Use the UP and DOWN buttons to select a sub menu.
4. Select a sub menu, and then the value you set will be saved.
Press the MENU button and the menu will disappear.
1. Turn on the camera and press the MENU button. A menu for each camera mode
appears. However, there is no menu for Voice Recording mode ( ).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Press the
LEFT or
RIGHT
button.
Press the
LEFT or
RIGHT
button.
Press the
UP or
DOWN
button.
Press the
UP or
DOWN
button.
Sharpness
RECORDING
Contrast
Normal
Normal
Auto Focus Center AF
OSD Info Full
Exit Move
MEMU
Volume
SOUND
Start
Normal
Off
Shutter Sound1
Beep Sound1
AF Sound On
Exit Move
MEMU
File
SETUP1
Language
Series
ENGLISH
Date&Time 07/02/01
Imprint Off
LCD Normal
AF Lamp On
Exit Move
MEMU
Sharpness
RECORDING
Contrast
Normal
Normal
Auto Focus Center AF
OSD Info Full
Move Change
Sharpness
RECORDING
Contrast
Normal
Normal
Auto Focus Center AF
OSD Info Full
Move Change
Sharpness
RECORDING
Contrast
Normal
Normal
Auto Focus Center AF
OSD Info Full
Move Change
Recording ( )
[ Sharpness ]
You can adjust the sharpness of the picture you
want to take. You cannot check the sharpness
effect on the LCD monitor before you take a picture,
because this function is applied only when the
captured image is stored on the memory.
[ PROGRAM mode ]
[ Contrast ]
You can set the difference between bright part of
the image and dark part of the image. This makes
the image be vivid or soft.
[High], [Normal], [Low] menus are selectable.
Icon Menu Description
Soft+
Soft
Vivid
Sharpness
RECORDING
Contrast
Soft+
Soft
Auto Focus Normal
OSDInfo
Vivid
Vivid+
[ PROGRAM mode ]
Sharpness
RECORDING
Contrast
High
Auto Focus Normal
OSDInfo
Low
Back Set
OK
Back Set
OK
The edges of the image are softened.
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
Normal
Vivid+
The edges of the image are emphasized. The edges
will appear sharp, but noise may occur in the recorded
image.