Filter
Top Products
《76》
● When this menu is selected without inserting a memory card, the [No Card]
message will display.
● If there is not enough space available in the memory card to copy saved
images in the internal memory (48MB), the [Copy To Card] command will
copy only some of the images and display [Memory Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory card into the
camera.
● When you move the images that are stored in the internal memory by doing
[Copy To Card] to the card, the next number of file names will be created in
the card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [Copy To
Card], the last stored image of the last copied folder is displayed on the
LCD monitor.
INFORMATION
Playback ( )
: You can check shooting information about the displayed image.
1. Select the [OSD Info] menu tab by pressing the
Up / Down button. And then press the Right
button.
2. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[ Full ] [ Basic ] [ OSD Off ]
Protect
PLAYBACK
Copy To Card
OSD Info
예
Full
Off
Basic
Delete
DPOF
ISO
AV
TV
FLASH
SIZE
DATE
80
F2.8
1/250
OFF
3648X2736
2007/02/01
Back Set
OK
On Screen Display information