Filter
Top Products
《37》
[ Selecting Video out type ]
■ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
Yellow - Video
White - sound
■ Connecting to an external monitor
● When the camera is connected to an external
monitor in the recording mode or play back mode,
the image (movie or still image) will be visible on
the external monitor and the LCD monitor of the
camera turns off.
Quick View
SETUP2
LCD Save
Video Out NTSC
PAL
Power Off
Format
Reset
Back Set
OK
Setup 2 ( )
[ Formatting a memory ]
■ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
● Sub menus
[No] : The memory will not be formatted. Press
the menu button three times and the menu
display will disappear.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
Quick View
SETUP2
Video Out
Yes
No
Power Off
LCD Save
Format
Reset
Back Set
OK