Filter
Top Products
ŝ9Ş
Connecting to a Power Source
Before turning on the camera power with an AC Charger, insert the rechargeable
battery that was charged for over 10 minutes with turning off the camera.
If you have access to a mains supply, using an AC Charger allows the camera to
be used for long periods of time.
Using the AC Charger
ƃ Ensure that neither the camera nor Charger comes into contact with water
or metallic materials as this may cause damage to camera and AC charger.
ƃ Please ensure that you use an AC Charger with the correct specification for
the camera. Failure to do so may affect your warranty.
DANGER
ƃ If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
ƃ If you charge the battery with the camera power on, the battery can't charge
fully. Turn the camera off while charging the battery.
CAUTION
ƈ How to charge the rechargeable battery (SLB-0837) with the AC Charger
ƃ Charging with the cradle
ƃ Charging with the camera
Charging LED
ƈ
There are 4 indicators for battery condition that are displayed on the LCD monitor.
ƃ When the camera is not used, turn off the camera power.
ƃ Low temperatures (belowŰ) can affect the performance of the battery and
you may experience reduced battery life.
ƃ Battery will usually recover at normal temperatures.
ƃ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
INFORMATION
Battery status
Battery indicator
Fully charged
Low capacity
(recharge or use
spare battery)
Low capacity
(recharge or use
spare battery)
Low capacity
(recharge or use
spare battery)