Filter
Top Products
3-3 3-4
E
■
If the IP router is connected to xDSL modem, select ‘PPPoE’ in Setup
➞ Basic Setup as figure and enter the User Name and Password to
access the ISP (Internet Service Provider).
■
If the IP router is connected to the Cable modem, select ‘Automatic
Configuration-DHCP' in Setup ➞ Basic Setup as figure.
■
After finishing the setting, click the ‘Save settings’ button and save the
setting.
■
Check the ‘Status’ page to verify that xDSL or Cable modem is
connected successfully.
■
Execute IPinstaller.exe program in the user’s Local PC to set the
SCC-C6475(P) IP connected to the IP router.
If not, click the ‘Connect’ button to retry, or recheck the setting value and
retry.
If xDSL or Cable modem is connected successfully, IP, Subnet Mask,
Gateway from ISP will be indicated.