Filter
Top Products
3-34
E
3-33
2. If the camera is installed over the internet assigned to Dynamic IP
- Select IP Type as Dynamic IP.
- If the camera is installed directly over the ADSL modem, select connection
type as ADSL Modem or Cable Modem.
(In case of this, be sure to set the ADSL connection ID and Password).
- If the camera is connected to the IP router and assigned to dynamic IP,
select IP Router (using DHCP) + LAN or IP Router (using DHCP)+ ADSL/
Cable.
- If the camera is assigned to IP from the internal network DHCP server,
select connection type as DHCP server.
●
Enter the adequate network setting value according to the connection type.
●
After applying for setting, check the network cable connection and reaccess
the camera.
●
After changing Dynamic IP setting, power off the camera and connect the
network cable operating dynamic IP. (In case of this, if they use ADSL or
Cable modem, power off the modem and power it on, and then reconnect the
camera power.)
User
●
Setting Login Authentication as disable, able to access without login process.
But in case of this, information about connector doesn’t display. The user
who accesses as non-authentication is authorized by User.
●
Use authority
- Administrator: Manager who is able to use every function. (Able to setup).
- Operator: Able to use every function except setup.
- User: Able to simple monitor.
●
Guest
- ID in the log in window: guest Password: User who entered guest to access.
- Same authority as User.
●
Register User ID, Password
At most 10 people will be possible.
Unable to delete, add Administrator. Default ID is set as root, only password
is changeable.
In case of correcting or deleting, select the ID select box desired to change.
ID, Password is available only English, numeric, special character(Some
characters are excepted.) available at most 19 character.