Filter
Top Products
5-9
E
5-8
2-3 Static (Fixed) IP
1. Select the “Basic Settings” of Setup Wizard.
2. Select “No” in case of using Static (Fixed) IP.
3. Select the “Use Static IP Address:.
4. Network Properties
➀ Enter IP Address : IP*
➁ Enter Subnet Mask : Subnet Mask*
➂ Enter Gateway IP : Gateway*
5. Select “Use These DNS Servers”
6. Enter Primary DNS and Secondary DNS: DNS*
7. Select “Use Default Address”
8. Press the “Apply” button.
Check the connection status as follows.
1. Select “Router Status”.
2. Verify WAN Port information.
Be sure to write down the Subnet Mask number to use the set
SCC-C6475(P) afterwards.
3. Verify the connection status.
4. Port Forwarding (Be sure to read this.)