Filter
Top Products
Netcam(W)_SNC-L200(W) Netcam(W)_SNC-L200(W)
18 19
Opening the Back Cover/Arranging Cable
Learn how to open the back cover and arrange the cable.
Power Connection
Connect power by using the power adapter and cord provided as
accessories of this product.
”»ˆ… ‚Ø
Connect the power adapter to the power connector of the Netcam(W).
Connect the jack of the power cord to the power adapter.
Insert the power plug to the wall outlet.
- When power is connected,power LED (red)is turned on,and the lens
automatically moves after 2 minutes.
CAUTION
Use only power supply, Manufacturer : Dongyang E&P, Model : AA-E8 (SNC-L200)
Push the back over with two hands to open it.
Connect the power cable to the power connector and the LAN connector.
Close the cover after aligning the cable with the wiring groove.
Arrange the cable.
- Arrange the cable in direction B when installing the camera on the wall.
-
Arrange the cable in direction A when installing the camera in Standing position.
AA
➞➞
Top Cover
BB
Use the power adapter provided by the manufacturer. (DC8.4V/1A)
Note
1
2
3
Power LED
Back of Main Body
Power Adapter
1 1
2
3
4
2
3
➞➞