Filter
Top Products
Netcam(W)_SNC-L200(W)
63
Netcam(W)_SNC-L200(W)
62
Network Configuration
Set the port number used to access the Netcam(W) over the Internet, and set the
display of the Netcam(W) icon in the “My Network Places.”
UPnP Configuration
Port Forwarding: Select the method of port number allocation. “Enable” is automatic
allocation, and “Disable” is not allocating the port number. “User Define” is the user
entering the port number.
Display a shortcut Icon in My Network Places: Decide whether to display the
SNC-L200(W) icon of the “My Network Places.”
UPnP Status (Select the settings of item 1 and 2 above and click Apply to display it)
- Status: Display the status of the UPnP.When succeeding, “Success” is displayed. When
failing, “Error” is displayed.
- Port No.: Display the allocated port number.
- Router Global Address: Display the router of the Global IP.
- Camera ‘s address for Local Network Access: Display the address with which the user
can access the Netcam(W) over the network.
- Camera ‘s address for Access via Internet: Display the address with which the user
can access Netcam(W) from external Internet.
1
2
3
For the SNC-L200(W)icon of “My
Network Places,”Windows XP
Service Pack 2 must be installed.
And the “UPnP
Framework ”in the exception tab of
“Controller-Windows Firewall ”must
be checked.
You can access the Netcam(W) by
double clicking the SNC-L200(W)
icon of “My Network Places.”
Note
Port number used to access the Netcam(W) over the Internet.
Network Port Configuration
Common Status: Display the status
of the Gateway and the DNS.
LAN Status: Display the status of the
IP address, the Netmask and the Mac
address.
PPPoE Status: Display the
connection status of the
ADSL(PPPoE).
Check the current connection status of the network.
View Network Status
1
2
3
The Common Status is information commonly used for all the
interfaces (Ethernet of PPPoE).
Note
1
2
3
1
2
3