Filter
Top Products
Netcam(W)_SNC-L200(W)
47
Netcam(W)_SNC-L200(W)
46
Using the Smart Viewer
Preset
You can store up to 8 lens directions,thereby restoring the lens to the originally
stored position after movement.
Select the Preset Number ( ) to be set.
Move the lens to the desired store position by using the lens direction button.
Click the Preset Store Button ( ).
Repeat steps 1 to 3 if you want to store another number.
Passive Infrared (PIR)
Click the PRI Button.
- PIR is displayed on the screen, and the sensor starts operating.
- When a motion is detected, the flash is turned on automatically to
capture images.
Click the Flash Button.
- The Flash is displayed on the screen. It is turned on for 5 seconds and
off for 30 seconds.
- Flash is not turned on again for 30 seconds, even if you click the Flash
Button during that time.
Detects and records motion of a human or an animal by using an infrared ray and
captured images.
Flash
You can monitor at night or in a dark room by using the Flash.
- You can choose the number of frames to be captured from 1 to 5
in the Alarm Notification Settings.You can also send the captured
images via E-mail.
- PIR may malfunction depending on temperature or surroundings,
since it detects changes in temperature from infrared (heat).
Note
To Set Preset
Select the Preset Number ( ).
Click the Preset Operation Button ( ).
To operate Preset
Select the Preset Number ( )to be deleted.
Click the Preset Delete Button ( ).
To Delete Preset
1
2
1
2
1
2
3
4