Filter
Top Products
Netcam(W)_SNC-L200(W)
61
Netcam(W)_SNC-L200(W)
60
Network Configuration
Set the Static IP or the network of the cable modem. Talk with the network
administrator, and enter correct values for items.
Network Configuration
Static IP
IP Address: Enter the Static IP address.
Netmask: Enter the Subnet Mask.
(typically 255.255.255.0.)
DNSI/DNS2: Enter the DNS Server
address.
(typically 168.126.63.1/168.126.63.2)
Default Gateway: Enter the basic.
(gateway 192.168.0.1)
DHCP IP –The IP address is
automatically allocated.
DNSI/DNS2: Enter the DNS Server
address. (typically
168.126.63.1/168.126.63.2)
The cable modem IP address keeps changing with the DHCP IP.
You can either jointly use the DDNS, or access the address
allocated to equipment by using the Network Status Notification
settings.
Note
1
2
3
1
4
Set the ADSL network.
PPPoE (ADSL)
User ID: Enter the log-in ID.
User Password: Enter the log-in password.
Confirm Password: Enter the log-in password again.
DNS1/DNS2: The DNS is automatically allocated.
1
2
4
3
Talk to the network administrator before entering setting values. With improper
network settings, you cannot set video transmission and the Smart.
Warning
The ADSL IP address keeps changing with the DHCP IP. You can
either jointly use the DDNS, or access the address allocated to
equipment by using the Network Status Notification settings.
Note
1
1
1
2
3
4
2
3
4