Filter
Top Products
Set the position of the image to added
8
Use the arrow button to set the position of the frame
where the image is to be inserted.
œ Use the arrow button to move the frame to the position
where you want the image to be inserted.
œ To change the frame size, press the MODE button to
return to step 5 and reset the first point.
9
Press the SET button.
œ The image appears in the frame.
Capture the image to be inserted
10
Compose the image as desired and press the shutter
release button to capture the image.
œ After the image is captured, you return to the Edit
Image Screen.
œ The compound image is completed and is saved as
the last still image.
œ To return to the Playback Setting Screen, press the
MODE button, or select “EXIT” and press the SET
button.
HELP
If “ DISK FULL” appears
œ This indicates that there is not enough empty space on the disk to save the compound image.
An amount of free space equal to the size of the background image is required. If you wish to
save the image, you must first erase some data in order to free up some disk space (see page
149).
NOTE
œ When capturing the image to be inserted, the flash and self-timer cannot be used. Also, even if
the shutter sound menu setting is H (see page 119), the shutter sound will not be heard.
œ The compression setting for the compound image is U. (The resolution will not be changed.)
Frame
Added image
ADD AUD I O
E X I T
ÄADD PHOTO
ADD AUDIO
EXIT
28/08/
28/08/
2001
19:00 100-0004
04
Edit Image Screen
133
English