Sanyo IDC-1000ZU Digital Camera User Manual


 
5
When the BATTERY CHARGE lamp turns off, unplug
the power cord from the wall outlet.
6
Remove the battery pack from the AC
adapter/charger.
œ If you are not going to attach the battery pack to the
digital disk camera right away, then place it in its
protective cover.
NOTE
œ You can use the digital disk camera with the AC power supply even while charging (see page
29). In this situation, charging is stopped automatically and AC power is supplied to the digital
disk camera. When the digital disk camera is turned off, charging is resumed.
œ During charging, the battery pack and AC adapter/charger will become warm. This is not a
malfunction.
If noise is received by a radio or television during charging
œ Perform the charging in a location away from the radio or television.
Ambient temperature during charging
œ The ambient temperature during charging should be kept between 10 and 35°C. If the
temperature drops below 10°C, the characteristics of the battery pack may not allow it to
become fully charged.
Recharge the battery pack before use in the situations given below
œ If the battery pack has not been used for a long period of time.
œ If the battery pack is new and is being used for the first time.
BATERY CHARGE lamp (red)
AC ADAPTER lamp (green)
1
2
25
English