Smart Technologies PC Digital Camera User Manual


 
Registration Benefits
In the past, we’ve made new features available as free software upgrades.
Register your Camfire PC system to be notified of free upgrades.
Keep the following information available in case you need to contact
Technical Support:
Register online at: www.smarttech.com/registration
Serial Number
Date of Purchase
FCC Warning
This equipment has been tested and found to comply with the limits for a "ClassA" digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
When the Camfire PC system is connected directly to a computer, the interface card used to power and communicate
with the Camfire PC system must be compliant and certified to IEEE 1394a-2000 standards. This applies to cards
installed in a desktop computer as well as PCMCIAcards used in laptop computers.
Camfire, Notebook, all SMARTproduct logo types, the Camfire logo and the SMART logo are trademarks of SMART
TechnologiesInc. Phillips is a registered trademark of Phillips Screw Company.Panduit is a registered trademark of
Panduit Corp.All other third-party product and company names may be trademarks of their respective owners.
U.S. Patent No. 5,528,290. Other U.S., Canadian and foreign patents pending.
© 2000–2003 SMARTTechnologiesInc. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior
written consent of SMART. Information in this manual is subject to change without notice and does not represent a
commitment on the part of SMART.
Printed in Canada 09/2003
Connecting the Camfire PC System Directly to a Computer
Trademark Notice
Copyright Notice