Sony 530P Camcorder User Manual


 
136
8-1 Saving and Loading User Files to and from a “Memory Stick”
Chapter
8
Saving and Loading User
Setting Data
8-1 Saving and Loading
User Files to and
from a “Memory
Stick”
The camcorder is equipped with a “Memory Stick” drive,
which enables you to save user files, scene files, lens files,
reference files and ALL files. You can load these files
from the “Memory Stick” for immediate recall of a
particular setting configuration.
When a menu page is displayed, you can set up the
camcorder so that inserting a “Memory Stick”
automatically jumps to the appropriate file-related menu
page.
For details about scene files, see 8-2 “Saving and Loading
Scene Files” on page 141.
For details about lens files, reference files and “ALL
files, refer to the Maintenance Manual.
For details of the function for jumping to the appropriate
file-related menu page, see 8-3 “Jumping to a File-Related
Menu Page When Inserting a “Memory Stick”” on page
145.
“Memory Sticks” usable with this
camcorder
With this camcorder, you can use “Memory Sticks” whose
capacity does not exceed 128 MB.
For details, see “Memory Stick” in the Specifications on
page 173.
8-1-1 Handling the “Memory Stick”
The “Memory Stick” can be inserted to or removed from
the camcorder with the power turned on or off.
Inserting the “Memory Stick”
Proceed as follows.
1
Open the cover of the menu operating section.
The “Memory Stick” slot is now visible.
2
Hold the “Memory Stick” with the notch facing
downward and the arrow facing away from you, and
insert the “Memory Stick” into the “Memory Stick”
slot until it clicks into place. Then close the cover.
Inserting the “Memory Stick”
“Memory Stick”