Sony 530P Camcorder User Manual


 
Chapter 4 Scene Selection
69
4-2 Basic Operations
3
Select the desired clip list (except for NEW FILE), and
press the SEL/SET dial or the MENU knob.
The message “LOAD OK? YES b NO” appears.
4
Turn the SEL/SET dial or the MENU knob to move the
b mark to “YES” and press the dial/knob.
The selected clip list is loaded into the current clip list.
5
Hold down the SHIFT button and press the SUB CLIP
button.
CLIP menu operations end.
Moving a sub clip
Proceed as follows.
1
Press the SUB CLIP button, turning on the indicator.
2
Press the THUMBNAIL button, turning on the
indicator.
Thumbnails of the sub clips within the current clip list
appear.
Notes
If the MENU ON/OFF switch is set to ON, set it to
OFF and press the THUMBNAIL button.
If you set the MENU ON/OFF to ON during
thumbnail display, thumbnail display is cancelled
and replaced with menu display.
To escape from the thumbnail display to the full-
screen display
Press the THUMBNAIL button, turning off the
indicator.
3
Use the SEL/SET dial or the MENU knob to select the
desired sub clip.
4
Hold down the SHIFT button, and press the SEL/SET
dial.
The sub clip operation menu appears.
To return to the thumbnail display without moving
the sub clip
Do either of the following.
Use the SEL/SET dial or the MENU knob to select
EXIT, and press the dial/knob.
Press the RESET button.
5
Use the SEL/SET dial or the MENU knob to select
MOVE, and press the dial/ knob.
The sub clip movement screen appears. The sub clip
selected in step 3 appears surrounded by a frame.
To escape from the sub clip movement screen to the
previous screen
Press the RESET button.
CLIP LIST LOAO ESC
E0001 04/08/08 21:57
E0002 04/08/24 11:15
E0003 04/08/25 15:30
E0004 NEW FILE
E0005 NEW FILE
E0006 NEW FILE
E0007 NEW FILE
E0008 NEW FILE
E0009 NEW FILE
E0010 NEW FILE
This shows that third sub clip is moved
to the position of eighth sub clip.
Cursor showing the position to which
the selected sub clip is moved