Filter
Top Products
Appendixes
173
Specifications
DC OUT 4-pin, 11 to 17 V DC, maximum rated
current 0.2 A
LENS 12-pin
REMOTE 8-pin
LIGHT 2-pin
i.LINK 6-pin
Recommended Additional
Equipment
Power supply and related equipment
BP- GL65/GL95/L60S Battery Pack
BP-M100 Battery Pack
BC-M50/M150 Battery Charger
AC-550/550CE AC Adaptor
AC-DN10 AC Adaptor
CA-701/702/702P Camera Adaptor
Viewfinder and related equipment
BKW-401 Viewfinder Rotation Bracket
Fog-proof filter (Part No. 1-547-341-11)
Lens assembly (farsighted) (Part No. A-8262-537-A)
Lens assembly (low magnification) (Part No. A-8262-538-
A)
Lens assembly (standard magnification with special
compensation for aberrations) (Part
No. A-8267-737-A)
Optical attachments
ND filter (
1
/
8
ND) (Part No. 3-174-685-01)
ND filter (
1
/
32
ND) (Part No. 3-174-683-01)
Consult your Sony representative for more information
about these filters.
Equipment for remote control
RM-B150/B750 Remote Control Unit
“Memory Stick”
MSH-32 (32 MB)
MSH-64 (64 MB)
MSH-128 (128 MB)
Audio equipment
ECM-672 Microphone
CAC-12 Microphone Holder
CCXA-53 Audio Cable (for converting 5-pin connector to
two 3-pin connectors)
WRR-855A/855B UHF Synthesized Tuner Unit
WRR-862 UHF Portable Tuner
WRT-8T UHF Transmitter
WRR Tuner Fitting (service part number: A-8278-057-A)
STEREO MIC IN connector (MA-126A board)
(service part number: A-1053-453-A)
DMX-P01 Portable Digital Mixer
For Audio equipment described above, confirm whether
the connector is male or female and the number of pins on
the connector.
The audio input connectors of the camcorder are female
and 3-pin and the audio output connectors are male and 5-
pin. A converting adaptor may be required depending on
the audio equipment to be connected to the camcorder.
Extension boards
CBK-SD01 SDI Output Board
CBK-SC01 Composite Input Board
CBK-FC01 Pull Down Board (for the PDW-510/530 only)
CBK-NC01 Network Adaptor
Equipment for maintenance and easier
handling
LC-777 Hard Carrying Case
LC-DS300SFT Soft Carrying Case
Tripod Adaptor VCT-14
Rain cover
Maintenance Manual
Design and specifications are subject to change without
notice.