Filter
Top Products
Appendixes
181
Menu List
PAINT Menu List
The following table lists and describes the items in the
PAINT menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
No. Page Item Settings Default Description
01 SW STATUS GAMMA OFF/ON ON Turns the gamma correction on or off.
CHROMA OFF/ON ON Turns the chroma of the composite signal on
or off.
MATRIX OFF/ON OFF Turns the linear matrix correction on or off.
KNEE OFF/ON ON Turns the knee correction on or off.
WHITE CLIP OFF/ON ON Turns the white clipping correction on or off.
DETAIL OFF/ON ON Turns the detail signal on or off.
APERTURE
OFF/ON ON Turns the aperture function on or off.
FLARE ON/OFF ON Turns the flare function on or off.
EVS OFF/ON OFF Turns the EVS shutter on or off.
TEST SAW OFF/REC/SAW OFF Selects the test signal.
02 WHITE COLOR TEMP <A> Display color
temperature
3200 Sets the color temperature of WHITE A.
COLOR FINE <A>
(–99 to +99)
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
R GAIN <A>
(–99 to +99)
0 Only the value of R GAIN is changed.
B GAIN <A>
(–99 to +99)
0 Only the value of B GAIN is changed.
D5600 <A> OFF/ON OFF Turns the WHITE A electronic 5600K filter on
or off.
COLOR TEMP <B> Display color
temperature
3200 Sets the color temperature of WHITE B.
COLOR FINE <B>
(–99 to +99)
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
R GAIN <B>
(–99 to +99)
0 Only the value of R GAIN is changed.
B GAIN <B>
(–99 to +99)
0 Only the value of B GAIN is changed.
D5600 <B> OFF/ON OFF Turns the WHITE B electronic 5600K filter on
or off.
03 BLACK/FLARE MASTER BLACK
(–99 to +99)
0 Adjusts the master black level.
R BLACK
(–99 to +99)
0 Adjusts the R black level.
B BLACK
(–99 to +99)
0 Adjusts the B black level.
MASTER FLARE
(–99 to +99)
0 Adjusts the flare level of the master.
R FLARE
(–99 to +99)
0 Adjusts the R flare level.
G FLARE
(–99 to +99)
0 Adjusts the G flare level.
B FLARE
(–99 to +99)
0 Adjusts the B flare level.
FLARE OFF/ON ON Turns the flare correction circuit on or off.
TEST OUT SELECT ENC/R/G/B ENC Selects the output signal of TEST OUT
connector.