Filter
Top Products
100
An unknown image appears on the screen.
• The camcorder is in [DEMO MODE] (p.55). Touch the LCD screen.
An unknown indicator appears on the screen.
• They may be warning indicators or messages (p.110).
The image remains on the LCD screen.
• This occurs if you remove the AC Adaptor from the wall socket or remove the battery pack
without turning off the power first. This is not a malfunction.
You cannot turn the LCD backlight off.
• During Easy Handycam operation (p.24), you cannot turn the LCD backlight on/off pressing
and holding DISP/BATT INFO. Cancel Easy Handycam operation (p.26).
The buttons do not appear on the touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander (DCR-
SR50E/SR60E/SR70E/SR80E)) (p.21, 38).
The buttons on the touch panel do not work correctly or do not work at all.
• Adjust the screen ([CALIBRATION]) (p.119).
• If you change the aspect ratio of the image, the aspect ratio of the buttons on the touch panel
and indicators will be switched to the selected one (p.23).
Refer also to “Adjusting the image during recording” (p.102).
Pressing START/STOP or PHOTO does not record movies/still images.
• Slide the POWER switch to light up the (Movie) or the (Still) lamp.
• Your camcorder is recording the image you have just shot on the hard disk of the camcorder.
You cannot press PHOTO while [CAPTURE] or appears on the LCD screen (p.26, 29).
• The hard disk of the camcorder is full. Delete unnecessary images. Or perform [HDD FORMAT]
(p.55).
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. With POWER switch turned on, leave
the camcorder for a while. If you still cannot operate the camcorder, turn it off, taking it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
• The folder number shows 999, and the file number shows 9,999. Delete images (p.42) or perform
[HDD FORMAT] (p.55).
• While activating [DROP SENSOR] (p.56), you may not record movies/still images.
LCD screen
Recording