Filter
Top Products
14
You can charge the battery after attaching the
“InfoLITHIUM” battery pack (P series)
(p.117) to your camcorder.
• You cannot use an NP-FP30 battery pack with
your camcorder. (See the reverse side of the
battery pack for the model number.) Installing the
battery pack with excess force may lead to
camcorder malfunction such as deterioration in
battery pack performance or difficulty in
removing the battery pack.
1 Slide the battery pack in the
direction of the arrow until it clicks.
2 Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
3 Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the v mark on the DC
plug is facing up.
4 Connect the mains lead to the AC
Adaptor and the wall socket.
Step 2: Charging the battery pack
DC IN
jack
CHG lamp
POWER switch
Battery
pack
DC plug
Mains lead
To the wall socket
AC Adaptor
DC IN jack