Filter
Top Products
277
Troubleshooting Поиск и устранение неисправностей
Types of trouble and how to correct trouble
Others
Symptom Cause and/or Corrective Actions
• The cassette has no cassette memory.
c Use a cassette with cassette memory (p. 140).
• The cassette memory is full.
c Erase unwanted titles (p. 143).
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not visible
(p. 33).
• The tape has a blank portion between recorded portions.
c Superimpose the title to recorded positions (p. 140).
• The cassette has no cassette memory.
c Use a cassette with cassette memory (p. 146).
• The cassette memory is full.
c Erase unwanted data (p. 143).
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red mark is not visible
(p. 34).
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the VCR
again (p. 114)
• The camcorder is connected to DV equipment of other than
Sony using the i.LINK cable (DV connecting cable).
c Set it to IR (p. 120).
• You have attempted to set a programme on a blank portion of
the tape.
c Set the programme again on a recorded portion (p. 124).
• The camcorder and the VCR are not synchronised.
c Adjust the synchronisation (p. 122).
• The IR SETUP code is incorrect.
c Set the correct code (p. 117).
• Setting programme on a blank portion of the tape is attempted.
c Set the programme again on a recorded portion (p. 190).
• COMMANDER is set to OFF in the menu settings.
c Set it to ON (p. 260).
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted with + and – incorrectly matching +
and – inside the battery compartment.
c Insert the batteries correctly (p. 319).
• The batteries are dead.
c Insert new ones (p. 319).
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD (p. 261).
(continued on the following page)
The title is not recorded.
The cassette label is not recorded.
Digital program editing to a tape
does not function.
Digital program editing to a
“Memory Stick” does not function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.