Filter
Top Products
GB
20
Attachment and removal of the
flash unit
Attaching the flash unit to the camera
• Before attaching to the camera, remove the protective cap from the terminal of the
Multi Interface foot of the flash unit and remove the shoe cap from the camera.
• When not using the flash unit, reattach the protective cap to the terminal of its
Multi Interface foot.
• If the built-in flash in the camera is protruding, lower it before attaching the flash unit.
• When attaching this flash unit to a camera that has an Auto-lock Accessory Shoe,
attach the supplied Shoe Adaptor to the camera. (page 22)
1 Turn off the power of the flash unit and move the lock
lever towards [RELEASE].
2 Firmly insert the Multi Interface foot all the way into the
Multi Interface Shoe of the camera in the direction of
the arrow.
3 Firmly move the lock lever towards [LOCK] to secure
the flash unit.