Filter
Top Products
Advanced Operations
69
GB
5 Set up the camera and flash unit.
• Set up the camera and flash unit in a dark location, such as indoors.
• See page 64 for details.
6 Make sure that the built-in flash and flash unit are fully
charged.
• The built-in flash full-charge indication varies depending on the camera.
For details, refer to the operating instructions of the camera.
• When the flash unit is fully charged in the wireless flash mode, the AF
illuminator on the front blinks, and the TEST button is lit in amber.
• When using the flash unit as a wireless flash, you can set it to beep when
charging is complete and when metering is complete. (Charge completion
time: about 0.6 seconds; Metering completion time: about 0.1 seconds) For
more details, see “Setting the beep function in wireless remote mode
[BEEP]” in “MENU settings” (page 92).