Filter
Top Products
Advanced Operations
71
GB
Setting wireless flash by flash only
Once you have performed the wireless flash setup in step [A], if you continue to use
the same camera and flash combination without changing the wireless channel then
you can also set the flash and camera separately to wireless.
Camera setting:
Set the flash mode to wireless (WL).
For details, refer to the operating instructions supplied with your camera.
Flash setting:
Set the flash unit's flash mode to wireless remote (WL RMT) and then select the
metering settings and groups for remote use.
1 Press the MODE button to bring up the MODE screen
and select [WL RMT].
2 Press the Fn button to display the Quick Navi screen
and press the control wheel up, down, left or right to
select the wireless remote setting indicator.
3 Press the center of the control wheel to display the
dedicated settings screen.
• You can also change the settings on the Quick Navi screen. (page 16)