Filter
Top Products
Advanced Operations
77
GB
5 Use test-flash to check the flash.
• The test-flash method differs depending on the camera used. For details,
refer to the operating instructions of your camera.
• If the test-flash does not work, change the position of the camera, flash, and
subject, or point the wireless control-signal receiver towards the camera.
Moreover, make sure that wireless channel of the off-camera flash is set to
the same channel as the controller.
6 Check again that the controller and the flash unit are
fully charged, and press the shutter button to take the
photo.
• Even if wireless control setting is set to [RATIO: OFF] (lighting ratio
control off), the controller flashes to transmit a signal.