Filter
Top Products
GB
32
Flash range
Press the shutter button halfway down.
The flash range for the proper exposure is displayed on the LCD panel. Make sure
that the subject is within this range and then take the photo.
The range that can be displayed on the LCD panel is from 1.0 m to 28 m (0.7 m to
28 m for downward bounce; see page 54). When the distance is beyond this range,
or is lit on either side of the Flash range.
• The flash range is not shown when using upward flash bounce, with wireless
flash, when communication with the camera is off, or when an off-camera cable
is used.
• When photographing beyond the lower limit of the flash range, the photo may be
over-exposed even if the TEST button blinks in green, or the bottom of the
picture may darken. Always photograph within the indicated flash range.
Proper exposure is obtained at less than 1.0 m.
If the flash range is less than 1.0 m, the lower area
of the image on the LCD monitor of the camera
may become dark. Change the flash range to adjust
the aperture and ISO sensitivity.
Proper exposure is obtained from 1.0 m to 28 m or
more.