Sony HVR-S270P Camcorder User Manual


 
117
Additional Information
Focal length
f=4.4 - 52.8 mm (3/16 - 2 1/8 in.)
When converted to a 35 mm still
camera
32.0 - 384 mm (1 5/16 - 15 1/8 in.)
(16:9),
39.5 - 474 mm (1 9/16 - 18 3/4 in.)
(4:3)
F1.6 - 2.0
Filter diameter: 72 mm (2 7/8 in.)
Color temperature
[AUTO]
[ONE PUSH AF]
[INDOOR] (3 200K)
[OUTDOOR] (5 800K±7 offset levels)
[MANU WB TEMP] (2 300K -
15 000K in 100K steps)
Minimum illumination
1.5 lx (lux) (Fixed Shutter Speed 1/25,
auto gain, auto iris) (F 1.6)
* “Exif” is a file format for still images,
established by the JEITA (Japan
Electronics and Information Technology
Industries Association). Files in this
format can have additional information
such as your camcorder’s setting
information at the time of recording.
**Still image resolution is obtained by the
unique pixel array of Sony’s ClearVid
CMOS Sensor and image processing
system (new Enhanced Imaging
Processor).
Output connectors
VIDEO OUT jack
BNC connector × 1
Video signal: 1 Vp-p, 75 Ω (ohms)
SVIDEO jack
S connector × 1
Luminance signal: 1 Vp-p, 75 Ω (ohms)
Chrominance signal: 0.3 Vp-p (burst
signal), 75 Ω (ohms)
AUDIO OUT jack
RCA connector × 2
Audio signal: -10 dBu (at load
impedance 47 kΩ (kilohms)), Output
impedance with less than 2.2 kΩ
(kilohms)
(0 dBu=0.775 Vrms)
TC OUT jack
BNC connector × 1
2.2 Vp-p, 600 Ω (ohms) / 1.2 Vp-p,
75 Ω (ohms)
COMPONENT OUT jack
BNC connector × 3
Y: 1 Vp-p, 75Ω (ohms), P
B/PR, CB/CR:
+/- 350 mV, 75 Ω (ohms)
HD/SD SDI OUT jack
BNC type × 1
SD-SDI: SD-SDI format,
SMPTE259M-C (270Mbps)
HD-SDI: HD-SDI format,
SMPTE292M
Input/Output connectors
LANC jack
Stereo mini-minijack (Ø 2.5 mm)
AUDIO INPUT1 (L)/AUDIO INPUT2
(R)/AUDIO INPUT3/AUDIO INPUT4
jack
XLR 3-pin, female,
-48 dBu: 3kΩ(kilohms)
+4 dBu: 10kΩ(kilohms)
(0 dBu=0.775 Vrms)
PHONES jack
Stereo-minijack (Ø 3.5 mm)
DC OUT 12V connector
4-pin, male, 12 V
LIGHT connector
2-pin, max. 35 W
LENS jack
12-pin connector
HDV/DV jack
i.LINK interface (IEEE 1394, 6-pin
connector S100)
Continued ,