Filter
Top Products
99
Troubleshooting
Shutter speed, gain, white balance or iris cannot be adjusted manually.
• Set the CAMERA MODE switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the screen.
• This phenomenon appears when using a slow shutter speed (p. 33). This is not a malfunction.
[SMTH SLW REC] [REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
The OUTPUT/DCC switch is set to BARS.
[MARKER] During [DATE REC]
[FOCUS MACRO] A Carl Zeiss lens is mounted, and the focus ring is set to
mode B.
A Carl Zeiss lens is not mounted.
[STEADYSHOT],
[FLANGE BACK]
A Carl Zeiss lens is not mounted.
[TC LINK] Your camcorder is not connected to an external device via an
i.LINK cable.
[TC COUNTUP] [TC MAKE] is set to [REGENERATE].
[UB-DATE/TC-TIME] [TC MAKE] is set to [REGENERATE].
[TC RUN] is set to [REC RUN].
[UB TIME REC] is set to [ON].
Date and time are not set.
[WORLD TIME], [DATE
REC]
Date and time are not set.
[x.v.Color] [REC FORMAT] is set to [DV].
[INTERVAL REC] [REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
[REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[DV FRAME REC] [REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
[EXT REC CTRL] During [SMTH SLW REC]
During [INTERVAL REC]
During [DV FRAME REC]
Cannot use Situation
Continued ,