Filter
Top Products
46
z Tips
• Set the INPUT1/2/3/4 switch to MIC+48V
when using the supplied microphone.
3 Set the level of input to be recorded on
each audio track.
If you want to adjust the recording volume
automatically, set the CH1 and CH2
switches to AUTO. If you want to adjust it
manually, set the switches to MAN. When
you set the switches to MAN, appears
on the screen. The CH switch numbers you
set to MAN appear on the right of the icon
( ). You can adjust the volume when the
switches are set to MAN by turning the
CH1 and CH2 dials.
b Notes
• Set the INPUT switches for the respective
AUDIO INPUT jacks, and the CH switches for
the corresponding recording tracks on a tape.
Example of 2CH recording (recording
audio input from INPUT1 and INPUT4)
1 Set CH1 of the REC CH SELECT
switch to IN1 and CH2 to IN4.
2 Set the INPUT1 and INPUT4 switches.
For example, set the INPUT1 switch to
MIC+48V and the INPUT4 switch to
MIC when the supplied microphone is
connected to the AUDIO INPUT1 (L)
jack, or a microphone that does not need
a power supply is connected to the
AUDIO INPUT4 jack, as illustrated.
3 Set the CH1 and CH2 switches.
For example, set the CH1 switch to
AUTO and the CH2 switch to MAN to
adjust the recording level of CH1
automatically and that of CH2
manually.
z Tips
• You cannot adjust the recording levels of CH3
and CH4 during 2-channel recording.
CH1 CH2
AUTO
MAN
AUTO
MAN
CH1 dial CH2 dial
REC CH SELECT
2CH MODE
IN1
CH1 CH2
IN2
IN4
IN3
INPUT1 INPUT2
LINE
MIC
48V
+
LINE
MIC
48V
+
INPUT3
LINE
MIC
48V
+
INPUT4
LINE
MIC
MIC MIC MIC MIC
48V
+
CH1 CH2
AUTO
MAN
AUTO
MAN
Changing the settings of your camcorder recordings (Continued)