Filter
Top Products
69
Using the Menu
Example: TYPE 4
You can select the speed at which the
automatic exposure adjustment function
follows changes in the brightness of the
subject. You can select the speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
You can select the highest iris value for the
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
b Notes
• This function is not effective during the manual
iris adjustment.
BON
Reduces flickering. Flickering of the
screen under a light source such as
fluorescent lamps will be reduced.
OFF
Not reduce flickering. Select this when you
do not want to reduce flickering.
b Notes
• Flickering may not be reduced for certain light
sources.
.
When you set this function to [ON], your
camcorder detects high contrast images,
such as backlit scenes, and automatically
improves the unexposed images. The
default setting is [OFF].
b Notes
• When you set [BACK LIGHT] to [ON],
[CNTRST ENHCR] is temporarily disabled.
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
• The back light function is canceled when you
set [SPOTLIGHT] to [ON].
When you set this function to [ON] ( ),
you can prevent overexposure of light
during recording of a subject under strong
light, such as a stage. For example, you can
prevent people's faces from over-
highlighting. The default setting is [OFF].
b Notes
• The spotlight function is canceled when you set
[BACK LIGHT] to [
ON].
• You cannot use the spotlight function if at least
two of iris, gain, and shutter speed are adjusted
manually.
x ON/OFF
When you select [ON], you can reduce
camera shakes. Select [OFF] ( ) when
you use a tripod (optional) to make images
look natural. The default setting is [ON].
x TYPE
You can select a type of camera-shake
reduction for different recording situations.
AE RESPONSE
AT IRIS LMT
FLCKR REDUCE
16:9
4:3
photometric area
CNTRST ENHCR
BACK LIGHT
SPOTLIGHT
STEADYSHOT
Continued ,