Filter
Top Products
84
*HVR-MRC1(supplied) or HVR-DR60
(optional)
b Notes
• When this function is set to [EXT ONLY],
does not flash even when there is no tape
inserted.
• You can use the REC START/STOP button of
your camcorder as a recording start/stop button
for the external recording unit when you set this
function to [EXT ONLY]. Use the REC button
of the video control buttons (p. 124) to start
recording on a tape or the STOP button to stop
recording.
• (EXT ONLY) flashes when you
connect an external recording unit that is not
supported by [EXT ONLY].
x STBY COMMAND
BREC PAUSE
Stops recording operation of a connected
device by putting it in pause when you stop
recording operation of your camcorder.
STOP
Stops recording operation of a connected
device when you stop recording operation
of your camcorder.
(TC/UB SET) menu
(TC PRESET/UB PRESET/TC LINK, etc.)
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 62 for details on selecting
menu items.
x PRESET
You can preset the time code.
1 Select [TC PRESET] with the SEL/PUSH
EXEC dial.
2 Select [PRESET] with the SEL/PUSH
EXEC dial.
3 Select the first 2 digits with the SEL/PUSH
EXEC dial.
You can set the time code between
00:00:00:00 and 23:59:59:24.
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/PUSH EXEC
dial.
x RESET
You can reset the time code (00:00:00:00).
Select [RESET] in step 1 of the
[PRESET].
You can increment the hour of time code by
1 and reset the minute, second and frame of
time code when you execute this function.
b Notes
• This function is available only when you set
[TC MAKE] to [PRESET].
x PRESET
You can preset the user bit.
1 Select [UB PRESET] with the SEL/PUSH
EXEC dial.
Push the MENU/STATUS switch to
MENU t select the (TC/UB SET)
with the SEL/PUSH EXEC dial.
TC PRESET
TC COUNTUP
UB PRESET
Push the MENU/STATUS switch to
MENU t select the (IN/OUT REC)
with the SEL/PUSH EXEC dial.