Filter
Top Products
39
Recording/Playback
KNEE
To set knee point and slope for video signal compression to reduce over-highlighting by
limiting signals in high contrast area of the subject to the dynamic range of your camcorder.
When you set the OUTPUT/DCC switch to ON, [KNEE] is automatically adjusted.
COLOR MODE
To set type and level of colors.
COLOR LEVEL
To set the color level.
COLOR PHASE
To set the color phase.
Item Description and settings
[AUTO SET] Available when you set the OUTPUT/DCC switch to ON
Sets the maximum point and sensitivity in the automatic mode.
[MAX POINT] : Sets the maximum point.
90% ~ 100%
[SENSITIVITY] : Sets the sensitivity.
HIGH/MIDDLE/LOW
[MANUAL SET] Available when you set the OUTPUT/DCC switch to OFF
Sets the knee point and slope manually.
[POINT] : Sets the knee point.
75% ~ 105%
[SLOPE] : Sets the knee slope.
-5(gentle) ~ +5(steep)
Item Description and settings
[TYPE] Selects a type of colors.
[STANDARD] : Standard colors
[CINEMATONE1]: Film camera image-like colors good with
[GAMMA] set to [CINEMATONE1]
[CINEMATONE2]: Film camera image-like colors good with
[GAMMA] set to [CINEMATONE2]
[ITU709 MTX] : Colors corresponding to ITU709
[LEVEL] Sets a color level when you set [TYPE] to the settings other than
STANDARD].
1 (close to color settings of [STANDARD]) - 8 (color settings of the
selected type)
Item Description and settings
-7 (light) to +7 (dark), -8: black and white
Item Description and settings
-7 (greenish) to +7 (reddish)
Continued ,