Filter
Top Products
32
b Notes
• Images, details of which are enhanced, will not
be recorded on a tape or a “Memory Stick Duo.”
z Tips
• You can focus an image more easily when you
use this function with the expanded focus.
You can manually adjust the iris to control
the volume of the light entering the lens. By
adjusting the iris, you can change or close
the aperture of the lens, which is expressed
as an F value between F1.6 and F11. The
volume of the light increases the more that
you open the aperture (decreasing F value).
The volume of the light decreases the more
that you close the aperture (increasing F
value). The current F value appears on the
screen.
1 During recording or standby, set the
CAMERA MODE switch F to
MANUAL.
2 Set the IRIS switch B to MAN.
3 Adjust the iris with the iris ring C.
During the manual iris adjustment, you
can temporarily return to the auto iris
adjustment while holding down the
PUSH AUTO button A.
z Tips
• The F value becomes close to F2.0 as the zoom
position changes from W to T even when you
open the aperture by setting the F value lower
than F2.0, such as F1.6.
• The range of focus, an important effect of the
aperture, is called the depth of field. The depth
of field gets shallower as the aperture is opened,
and deeper as the aperture is closed. Use the
aperture creatively to obtain the desired effect in
your photography.
• This is handy for making the background
blurred or sharp.
To adjust the iris automatically
Set the IRIS switch B or
CAMERA MODE switch F to AUTO.
b Notes
• When you set the CAMERA MODE switch F
to AUTO, other manually adjusted items (gain,
shutter speed, white balance) also become
automatic.
.
You can record the subject clearly by using
the ND filter D when the recording
environment is too bright. If you do not
want to reduce the volume of light, use the
ND filter 1. The ND filters 2, 3 and 4
reduce the volume of light to about 1/4,
1/16 and 1/64, respectively.
Adjusting the exposure
Adjusting the iris
ON
OFF
ON
OFF
AUTO
CAMERA
MODE
ATW
456
AGC
MANUAL
CAMERA
VCR
POWER
GAIN
OUTPUT
DCC
WHT BAL
BARS CAM
PRST A B
STATUS
MENU
OFF ON
H M L
ON OFF
SEL/PUSH EXEC
SHUTTER
OFF ON
LK
SEL
MAN
PUSH AUTO
TW
AUTO
IRIS
Adjusting the volume of light
(ND filter)
Changing the settings of your camcorder recordings (Continued)