Filter
Top Products
58
Changing/checking the settings in your
camcorder
You can turn on and off the display of the
time code, tape counter, and other
information on the screen.
Press the DISPLAY button A.
The screen indictors turns on (displayed)
and off (not displayed) as you press the
button.
When the CAMERA/VCR switch is set to
CAMERA, the screen changes (detailed
display t simple display t no display) as
you press the button.
z Tips
• You can display the screen indicators during
playback on a TV. Select [V-OUT/PANEL] of
[DISP OUTPUT] (p. 80).
• When you assign [DISPLAY] of [ASSIGN
BTN] to an ASSIGN button, you can use the
ASSIGN button to change the screen.
• To output a signal containing information on
indicators such as icons via the COMPONENT
OUT jack or the HD/SD SDI OUT jack, set
[DISP OUTPUT] to [ALL OUTPUT].
You can display information, including
date, time and camera data, automatically
stored during recording on the screen
during playback.
1 Set the CAMERA/VCR switch E
to VCR.
2 Press the DATA CODE button B
during playback or pause.
The screen changes (date and time
display t camera data display t no
display) as you press the button.
A SteadyShot off
B Exposure
appears during playback of the
movie recorded with the iris, gain and
shutter speed automatically adjusted.
Changing the screen
L
O
C
K
DATA CODE
REVIEW CUE
STOP
REW PLAY FF
CAMERA
VCR
POWER
GAIN
OUTPUT
DCC
WHT BAL
BARS CAM
PRST A B
STATUS
MENU
OFF ON
H M L
ON OFF
SEL/PUSH EXEC
MEMORY
DELETE
DISPLAY LCD BRIGHT
INDEX
-
+
-
+
PLAY
C
D
A B
Displaying recording data (Data
code)